Home

System-On-Modules (SOMs)

Allwinner Series

MYC-LT536

MYC-LT536

T536 MCU: Based on Quad ARM Cortex-A55 Cores and RISC-V Architecture with 2 Tops NPU

Allwinner T536 processor based on 1.6GHz Quad ARM Cortex-A55 Cores and 600MHz RISC-V E907 MCU

2Tops NPU (T536MX-CEN2), Graphic 2D, 4K HD Video Codec

1GB/2GB/4GB LPDDR4, 8GB/16GB/32GB eMMC, 32Kbit EEPROM

Power Management IC (PMIC)

381-pin Expansion Interface with LGA Package

Supports for Linux 5.10 OS

MYD-LT536 Development Board

Allwinner Third-party Partner

Overview

Send an Inquiry

SOM Development Board Hardware & Software Download Ordering Related Topics Similar Products

High-Performance Allwinner T536 Processor with 2 TOPS NPU and Rich Multimedia Interfaces

The Allwinner T536 series processor is an industrial-grade application chip based on ARM architecture, designed specifically for high-performance, low-power embedded applications. It integrates a quad-core Cortex-A55 CPU, an E907 co-processor, and includes a 2 TOPS NPU, G2D graphics engine, and a 4K VPU for video decoding and encoding.

SOM - MYC-LT536

Measuring only 43mm by 45mm, the MYC-LT536 is a compact System-On-Module (SOM) based on the Allwinner T536 processor
(T536MX-CEX/T536MX-CEN2). It boasts a quad-core ARM Cortex-A55 CPU running at 1.6GHz and a RISC-V E907 MCU operating at 600MHz. The module supports a 2Tops NPU (only for T536MX-CEN2), 2D graphics and a VPU for 4K HD video codec capabilities. The MYC-LT536 incorporates the T536 processor and offers onboard options of 1GB/2GB/4GB LPDDR4 memory, 8GB/16GB/32GB eMMC storage, a 32Kbit EEPROM, and a Power Management IC (PMIC). It features a 381-pin expansion interface in an LGA package, which simplifies soldering onto base boards. This interface enables the base board to carry most I/O signals to and from the SOM.

Development Board - MYD-LT536

MYIR offers the MYD-LT527 Development Board for evaluating the MYC-LT527. This board is assembled by soldering the MYC-LT527 SOM onto a base board which is served as an expansion board specifically tailored for using with the MYC-LT527. It is equipped with one USB3.0, two USB2.0, two Gigabit Ethernet, two CAN interfaces, one WiFi/Bluetooth module, Micro SD card slot, Audio interface, two Mini-CSI interfaces as well as multiple display interfaces: HDMI, Mini-DP, MIPI-DSI and LVDS. It also features a 40-pin RPI compatible expansion interface and one MYIR custom 40-pin expansion interface, MI Fans PI interface, for increased expandability.

Rich Development Resources

The MYC-LT536 SOM and development board provide driver support for the Linux operating system, and provide user manuals, PDF schematics, peripheral drivers, BSP source code packages, development tools and other related materials; providing developers with a stable design reference and a complete software development environment.

Widely Used in Entry-level Embedded Systems

The Allwinner T536 SOM from MYIR with its exceptional performance and broad application versatility, is extensively deployed for wide range of industries, including power protection and relay systems, power DTU solutions, industrial IoT devices, industrial automation, robotics, and integrated display control systems.

Power Reinsurance

Display and Control Machine

Industrial Internet Equipment

Industrial Control

Industrial Robot

Power DTU

Hardware & Software

MYIR provides ODM and OEM services tailored to existing SOMs and carrier boards. For further inquiries, please reach out to MYIR.

System-On-Module (SOM) Development Board Carrier Board Software Features

Item	Description
Processor	T536MX-CEX：4ARM Cortex-A55@1.6GHz，E907 RISC-V@600MHz T536MX-CEN2：4ARM Cortex-A55@1.6GHz，E907 RISC-V@600MHz，2 TOPS NPU
Power Management Chip	MYC-LT536ME: AXP717D MYC-LT536MN2: AXP717D、AXP323
Memory	LPDDR4: 1GB/2GB/4GB eMMC Flash: 8GB/16GB/32GB EEPROM: 32KB
Footprint	LGA 381PIN
Working Temperature	-40~85 Celsius (industrial grade)
Dimensions	45mm x 43mm
PCB	12-layer design
Power Supply	SOM: 5V/3A
Ethernet	2x RGMII
USB	1x USB 2.0 DRD 1x USB 2.0 Host
PCIE/USB	1x PCIe 2.0 (reused with USB 3.1 DRD)
SDIO	1x SD V3.0, 4bits 1x SDIO V3.0, 4bits
Localbus	8/16-bit width Localbus
UART	17x UART
SPI	6x SPI
I2C	9x I2C
CAN	4x CAN FD
Audio	1x LINEOUT
	4x I2S/PCM
	1x SPDIF TX, 1x SPDIF RX
DISPLAY	1x Parallel DSI, supports RGB/BT.656/i8080, 1080p@60fps
	1x LVDS
	1x MIPI DSI
Camera	1x Parallel CSI
	1x MIPI CSI
	1x ISP, 8M@30fps offline mode, 5M@30fps online mode
ADC	1x 26-ch GPADC,12-bit, 1MHz
PWM	34x PWM
Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet.

ITEM	DESCRIPTION
The MYD-LT536 Development Board Base Board
Power Supply	12V DC 2A
Button	5x Buttons (FEL, RST, PWR, USRK1, USRK2)
LED	4x LEDs (PWR, RUN, USRL1, USRL2)
SD	1x Micro SD card slot
SSD	1x NVMe PCIe M.2 2280 SSD socket
RTC	1x RTC Battery Interface
DEBUG	1x USB Debug UART (Type-C)
FAN	1x FAN socket
Ethernet	2x 10/100/1000 Mbps Ethernet interface
Ethernet	1x 10/100Mbps Ethernet (RJ45, USB-to-Ethernet interface)
WIFI/BT	WiFi/Bluetooth Module (complies with IEEE 802.11 a/b/g/n/ac standard and supports Bluetooth V5.2)
USB	2x USB 2.0 Host (Type-A)
USB	1x USB 2.0 DRD (via 40-pin MiFAN Interface)
Localbus	1x Localbus (8/16-bit width, data/address multiplexed, 1 chip select)
DISPLAY	1x LVDS (40-pin FPC connector, 1366* 768@60fps, single-link) Supports MYIR’s MY-LVDS070C LCD Module with Capacitive Touch Screen through the LCD interface
Audio	1x Audio Line Out interface
Expand IO	1x 2.54mm 2 x 20-pin male expansion header (RPI interface, GPIO/I2C/UART/SPI/CAN)
Expand IO	1x 2.54mm 2*20-pin male expansion header (MI Fans PI interface, GPIO/I2C/UART/SPI/USB/PWM)
The MY-ICEB001 Expansion Board
Power Supply	12V DC 2A
Button	2x Buttons (RESET, USER)
LED	2x LEDs (RUN, USER)
RS232	1x RS232
RS485	2x RS485
CAN	2x CAN
USB	3x USB 2.0 (Type-A)
4G	1x Mini-PCIe Slot for USB-based 4G LTE Module
RPI Interface	1x RPI interface (2.54mm pitch 40-pin male header)
MiFAN Interface	1x MI FANs PI interface (2.54mm pitch 40-pin male header)

Item	Features	Description	Source Code
Bootloader	TFA	First bootloader 2.8.15	YES
Bootloader	U-boot	Second bootloader uboot_2022.10	YES
Linux Kernel	Linux	Customized base on official kernel_5.10 version	YES
Drivers	USB Host	USB Host driver	YES
	USB OTG	USB OTG driver	YES
	EEPROM	BL24C32F driver	YES
	I2C	I2C bus driver	YES
	SPI	SPI bus driver	YES
	Ethernet	YT8531SH-CA driver	YES
	Ethernet	SR9900AI driver	YES
	LVDS	MY-LVDS070C display module driver (1024*600 pixels resolution)	YES
	RTC	LK8563T driver	YES
	GPIO	Generic GPIO driver	YES
	UART	RS232/RS485 Driver	YES
	CAN	CAN Driver	YES
	WiFi	AP6256 driver	YES
	BT	AP6256 driver	YES
File System	myir_image_lt536_gk.img	Full-featured images built with buildroot	YES

右滑表格查看更多内容

Download

File Name	Type	Size
MYC-LT536 Overview	pdf	2.35 MB
MYD-LT536 Overview	pdf	2.76 MB
3D STEP File for MYC-LT536 SOM.rar	rar	5.94 MB

Ordering

SOMs	CPU	RAM	Flash	Working Temp.	Price	Ordering
MYC-LT536ME-8E1D-160-I (without NPU)	T536MX-CEX	1GB LPDDR4	8GB eMMC	-40~85℃	USD39
MYC-LT536ME-16E2D-160-I (without NPU)	T536MX-CEX	2GB LPDDR4	16GB eMMC	-40~85℃	USD47
MYC-LT536MN2-32E4D-160-I (with NPU)	T536MX-CEN2	4GB LPDDR4	32GB eMMC	-40~85℃	USD59
Development Boards	Packing List		With WiFi	Working Temp.	Price	Ordering
MYD-LT536ME-8E1D-160-I-GK (1GB LPDDR4, 8GB eMMC, without NPU)	One MYD-LT536 board (including MYC-LT536 SOM) One USB cable One 12V/2A Power adapter One WiFi/BT PCB antenna (including ipex connector) Four phoenix connectors One Quick Start Guide		Yes	-40~85℃ (WiFi/BT Module: -30~85℃)	USD115
MYD-LT536ME-16E2D-160-I-GK (2GB LPDDR4, 16GB eMMC, without NPU)			Yes	-40~85℃ (WiFi/BT Module: -30~85℃)	USD129
MYD-LT536MN2-32E4D-160-I-GK (4GB LPDDR4, 32GB eMMC, with NPU)			Yes	-40~85℃ (WiFi/BT Module: -30~85℃)	USD145
Add-on Options	Description				Price	Ordering
MY-LVDS070C	MY-LVDS070C 7-inch LCD Module with capacitive touch screen				USD99

右滑表格查看更多内容