logo
TI AM437x TI AM437x TI AM437x TI AM437x
  • TI AM437x
  • TI AM437x
  • TI AM437x
  • TI AM437x

MYC-C437X-V2

High-Performance AM437x MPU equipped with PRU Co-processor

Up to 1GHz TI AM437x Series ARM Cortex-A9 Processors

512MB DDR3, 4GB eMMC, 32KB EEPROM

Gigabit Ethernet PHY

Power Management IC

Two 0.8mm pitch 100-pin Board-to-Board Expansion Connectors

CE Certificated, Long-term Availability

Provided with Linux and SYS/BIOS (TI-RTOS) Software Packages    

MYD-C437X-V2 Development Board

TI Third-party Partner


High-Performance AM437x equipped with PRU co-processor

The MYC-C437X-V2 SOM and development board are built around the ARM Cortex-A9 core TI AM437x processor, featuring a SitaraTM ARM Cortex-A9 32-bit RISC microprocessor running at up to 1GHz. It is equipped with NEONTM SIMD coprocessor and supports Vector floating-point (VFPv3) coprocessor. The board also includes 32KB L1 command and data high-speed caching, as well as 256KB L2 or L3 cache. Additionally, it supports 32-bit LPDDR2, DDR3, DDR3L memory types and universal memory (NAND, NOR, SRAM, etc.) with up to 16-bit ECC.

SOM - MYC-C437X-V2

The MYC-C437X-V2 is a low-cost compact-sized SOM (System on Module) based on 1GHz Sitara AM437x ARM Cortex-A9 processors from Texas Instruments (TI), featuring 3D graphics acceleration for rich graphical user interfaces, PRU-ICSS for industrial protocols, improved Vector Floating Point (VFP) unit and other peripherals and interfaces support like Quad-SPI, dual parallel cameras, two independent eight-channel ADCs, etc. It integrates 512MB DDR3 SDRAM, 4GB eMMC Flash, 32KB EEPROM, Gigabit Ethernet PHY and Power Management IC TPS65218 on board and carry most of the I/O signals to and from the SOM through two 0.8mm pitch 2*50-pin board-to-board expansion connectors

Development Board - MYD-C437X-V2

The MYD-C437X-V2 development board is using the MYC-C437X-V2 SOM as the core controller board which integrates the core components including the AM437x processor, 512MB DDR3, 4GB eMMC, 32KB EEPROM, Gigabit PHY and PMIC (TPS65218). The MYC-C437X-V2 is mounted onto the MYD-C437X-V2 base board through two 0.8mm pitch 2*50-pin board-to-board connectors. In addition to those functions provided by the SOM, the base board has extended a rich set of peripherals through headers and connectors from the SOM and some extended controller chips including two serial ports, four USB Host ports, one USB Device port, dual Gigabit Ethernet ports, one CAN, one RS485, two camera interfaces, one Micro SD, HDMI, LCD, Touch screen and more others.

Rich Development Resources

MYC-C437X-V2 provides driver support for the Linux operating system, along with development kits and related materials. It provides stable design reference and perfect software development environment for developers, which can effectively help developers improve development efficiency, shorten development cycle, optimize design quality, accelerate product development and market time

Widely Used in Entry-level Embedded Systems

The MYC-C437X-V2 SOM and development board, based on the TI AM437x processor, are used in embedded applications in the home and industrial sectors for navigation devices, bar scanners, portable mobile radios, test and measurement products.

Barcode Scanner

Medical Devices

Intelligent Tolling System

Industrial Measurement Equipment

Industrial

Industrial Interactive Interface

Hardware & Software

MYIR provides ODM and OEM services tailored to existing SOMs and carrier boards. For further inquiries, please reach out to MYIR.
ItemDescription
Processor

AM4377: Cortex-A9@1GHz

AM4378: Cortex-A9@1GHz

Memory

DDR3: 512MB SDRAM

eMMC Flash: 4GB  (reserved 256/512MB Nand Flash design)

QSPI Flash: 16MB  (reserved design, not soldered on board)EEPROM: 32KB

Working Temperature0~+70℃ (commercial grade);-40~+85℃ (industrial grade)
Ambient Humidity20%~90%,noncondensing
Dimensions60mm x 45mm
PCB8-layer design
Power SupplySOM: 5V/0.33A
Power Consumption

Base board: 5V/0.2 A

Base board + SOM: 5V/0.7 A

Base board + SOM + 4.3 inch touch screen: 5V/1.1 A

Base board + SOM +7 inch touch screen: 5V/1.2 A

Power Management ICTPS65218
Ethernet 

Gigabit Ethernet PHY

Power indicator 

One power indicator (Red LED)

User LED

One user LED (Green

Expansion Interface

Two 0.8mm pitch 2*50-pin board-to-board expansion connectors

- 2x USB
- 6x Serial ports
- 2x I2C
- 2x CAN
- 2x SPI
- 14x ADC (8 channels from ADC1 and 6 channels from ADC0)
- 3x SDIO

Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet.
右滑表格查看更多内容

Download

File Name Type Size Download Links
MYC-C437X-V2 Overview pdf 969.28 KB download
MYD-C437X-V2 Overview pdf 1.12 MB download
3D STEP File for MYC-C437X-V2 SOM.rar rar 2.34 MB download

Ordering

SOMsCPURAMFlashWorking Temp.PriceOrdering
MYC-C4378-V2-4E512D-100-IAM4378512MB DDR34GB eMMC-40~85℃USD75shopcar
MYC-C4377-V2-4E512D-100-IAM4377512MB DDR34GB eMMC-40~85℃USD89shopcar
Development BoardsPacking ListWith WiFiWorking Temp.PriceOrdering
MYD-C4378-V2-4E512D-100-I

* One MYD-C4378-V2 board 

* One 1.5m cross Ethernet cable 

* One 1.5m mini USB2.0 Cable 

* One 5V/2A Power adapter 

No-40~85℃USD145shopcar
MYD-C4377-V2-4E512D-100-INo-40~85℃USD179shopcar
Add-on OptionsDescriptionPriceOrdering
MY-TFT043RV2MY-TFT043RV2 4.3-inch LCD Module with Resistive Touch ScreenUSD59
MY-TFT070RV2MY-TFT070RV2 7-inch LCD Module with Capacitive Touch ScreenUSD79shopcar
MY-TFT070CV2MY-TFT070CV2 7-inch LCD Module with Resistive Touch ScreenUSD89shopcar
MY-CAM002UMY-CAM002U USB Camera ModuleUSD19shopcar
MY-CAM011BMY-CAM011B BUS Camera ModuleUSD25shopcar
MY-WF003UMY-WF003U USB WiFi ModuleUSD13
右滑表格查看更多内容