Home

System-On-Modules (SOMs)

TI Series

MYC-J335X-V2

MYC-J335X-V2

Supports up to 6x UART, 2x GigE, 2x CAN, 1x LCD

Up to 1GHz TI AM335x Series ARM Cortex-A8 Processors

256MB DDR3, 256MB Nand Flash

On-board Gigabit Ethernet PHY

Power Management IC (PMIC)

DDR2 SO-DIMM 200-pin Expansion Interface

CE Certificated, Long-term Availability

Ready-to-Run Linux 4.1.18 OS

MYD-J335X-V2 Development Board

TI Third-party Partner

Overview

Send an Inquiry

SOM Development Board Hardware & Software Download Ordering Related Topics Similar Products

TI AM335x MPU featured with 3D GPU and PRU-ICSS separate from the ARM core

The AM335X series features the high performance, low power features of the ARM Cortex-A8 core, providing the highest DMIPS at the same cost. It also provides 3D graphics acceleration and integration of key peripherals to meet various application needs. Optional 3D graphics accelerators with performance up to 20 M/tri/s, support for LPDDR1/DDR2/DDR3 memory, and independent PRU subsystems provide additional flexibility in product design. Optional support for Ethercat and Profibus further meets the needs of industrial design.

SOM - MYC-J335X-V2

The MYC-J335X-V2 is a highly capable System on Module (SOM) featuring the TI AM335x ARM Cortex-A8 Sitara processors, which can run at speeds up to 1GHz. This module includes a robust 2D/3D graphics accelerator and integrates key components such as the AM335x processor, 256MB DDR3 SDRAM, 256MB NAND Flash, 32KB EEPROM, a Gigabit Ethernet PHY chip, and a Power Management IC. It is a ready-to-run Linux controller board, supporting -40 to +85 Celsius extended temperature operation and has brought out up to two CAN bus, two Gigabit Ethernet, two USB OTG and up to six Serial ports and more other signals from one DDR2 SO-DIMM 200-pin gold finger expansion interface.

Development Board - MYD-J335X-V2

The MYC-J335X-V2 is mounted onto the MYD-J335X-V2 base board through an SO-DIMM 200-pin gold finger interface. In addition to those main functions provided by the MYC-J335X-V2, the MYD-AM335X-J base board has extended more functions through headers and connectors, which makes the board versatile for various industrial applications. It features up to six serial ports, two Ethernet ports, USB Host, OTG, CAN, RS485, TF card slot, Audio, LCD and more other peripherals on board. It can support -40 to +85 Celsius extended temperature operation and ready to run Linux operating system.

Rich Development Resources

MYC-J335X-V2 provides driver support for the Linux operating system, along with development kits and related materials. It provides stable design reference and perfect software development environment for developers, which can effectively help developers improve development efficiency, shorten development cycle, optimize design quality, accelerate product development and market time

Widely Used in Entry-level Embedded Systems

The MYC-J335X-V2 is mainly used in consumer products including game peripherals, charging pile billing control units, high-energy toys, printers, consumer medical devices and educational terminals, as well as intelligent charging systems, intelligent vending machines, weighing systems and other consumer products.

Educational Terminal

Medical Devices

Gaming Peripherals

Intelligent Tolling System

EV Charging Pile TCU

Industrial

Hardware & Software

MYIR provides ODM and OEM services tailored to existing SOMs and carrier boards. For further inquiries, please reach out to MYIR.

System-On-Module (SOM) Development Board Carrier Board Software Features

Item	Description
Processor	AM3352: Cortex-A8@800MHz AM3358: Cortex-A8@1GHz
Memory	DDR3: 128/ 256/ 512MB SDRAM Nand Flash: 128/ 256/ 512MB
Footprint	DDR2 SO-DIMM 200-pin gold finger expansion interface
Working Temperature	-40～+85℃ (industrial grade)
Ambient Temperature	-50～+100 ℃
Ambient Humidity	20%~90%，noncondensing
Dimensions	37mm x 39mm
PCB	8-layer design
Power Supply	SOM: +5V/0.8A
Power Consumption	Base board: 12V/0.1A
	Base board + SOM: 12V/0.2A
	Base board + SOM + 4.3 inch touch screen: 12V/0.23A
Ethernet	On-board Gigabit Ethernet PHY
Watchdog	External Watchdog circuit
Power Management IC	TPS65217C
Power indicator	One power indicator (Red LED
User LED	One user LED (Green)
Expansion Interface	DDR2 SO-DIMM 200-pin gold finger connector (the extended signals please refer to the pinouts diagram)- 2 x Gigabit Ethernet - 2x USB OTG - Up to 6x Serial ports - Up to 2x I2C - Up to 2x SPI - Up to 2x CAN - 8x ADC - 2x PWM - 3x SDIO (One SDIO has multiplexed with Nand Flash signals)
Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet.

ITEM	DESCRIPTION
Power Supply	12V/2A
Audio	1x Audio input port (3.5mm jack) 1x Stereo Audio output port (3.5mm jack)
Display	1x LCD interface (16-bit true color, supports optional 4.3- and 7-inch TFT LCD Module)
USB	1x USB2.0 Host port 1x Mini USB2.0 OTG port
Serial ports:	Up to 6 x Serial ports - 1x 3-wire RS232 - 4x 5-wire RS232 - 1x USB Debug serial port - 2x RS485 (multiplexed with UART2 and UART3, with isolation)
TF card	1x TF card slot
CAN	1x CAN interface (with isolation)
Ethernet	2x 10/100/1000Mbps Ethernet interfaces
JTAG	1x 2.54mm pitch 10-pin JTAG interfac
User LEDs	2x User LEDs (Green)
RTC	Battery backed RT
Buttons	4x Buttons (1 x Reset button, 2 x User buttons, 1 x Power button)
Power indicator	1x Power indicator (Red LED)
Expand IO	1x 2.0mm pitch 20-pin and 1 x 2.0mm pitch 10-pin expansion connectors - 3x ADC - 1x SDIO - 1x UART - 1x I2C - 8x GPIO

Watchdog driver (in source code)

Item	Features	Description	Source Code
Bootstrap	SPL	The primary bootstrap (in source code)	YES
Bootstrap	U-boot	The secondary bootstrap (in source code)	YES
Linux Kernel	Linux 4.1.18	Linux kernel customized for MYD-J335X-V2 (in source code)	YES
Drivers	USB Host USB Device USB OTG	USB Host/Device/OTG driver (in source code)	YES
	Ethernet	Gigabit Ethernet driver (in source code)	YES
	MMC/SD/TF	MMC/SD/TF card driver (in source code)	YES
	NandFlash	NandFlash driver (in source code)	YES
	CAN	CAN driver (in source code)	YES
	RS485	RS485 driver (in source code)	YES
	Audio	Audio driver (in source code)	YES
	LCD Controller	LCD driver, support 4.3-inch TFT LCD (in source code)	YES
	RTC	RTC driver (in source code)	YES
	Touch driver	Resistive Touch driver (in source code)	YES
	Button	Botton driver (in source code)	YES
	UART	UART driver (in source code)	YES
	LED	LED driver (in source code)	YES
	GPIO	GPIO driver (in source code)	YES
	Watchdog driver (in source code)	Watchdog driver (in source code)	YES
	EXT UART	Extended UART driver (in source code)	YES
	EXT GPIO	Extended GPIO driver (in source code)	YES
File System	Buildroot	Provide tar package and ubi image file	YES

右滑表格查看更多内容

Download

File Name	Type	Size	Download Links
MYC-J335X-V2 Overview	pdf	950.21 KB
3D STEP File for MYC-J335X-V2 SOM.rar	rar	1.55 MB

Ordering

SOMs	CPU	RAM	Flash	Working Temp.	Price	Ordering
MYC-J3352-V2-256N256D-80-I	AM3352	256MB DDR3	256MB Nand Flash	-40~85℃	USD49
MYC-J3358-V2-256N256D-100-I	AM3358	256MB DDR3	256MB Nand Flash	-40~85℃	USD55
Development Boards	Packing List		With WiFi	Working Temp.	Price	Ordering
MYD-J3352-V2-256N256D-80-I	* One MYD-J3352-V2 board * One 1.5m cross Ethernet cable * One 1.5m mini USB2.0 Cable * One 12V/1.5A Power adapter		No	-40~85℃	USD135
MYD-J3358-V2-256N256D-100-I			No	-40~85℃	USD139
Add-on Options	Description				Price	Ordering
MY-TFT043RV2	MY-TFT043RV2 4.3-inch LCD Module with Resistive Touch Screen				USD59
MY-TFT070RV2	MY-TFT070RV2 7-inch LCD Module with Capacitive Touch Screen				USD79
MY-TFT070CV2	MY-TFT070CV2 7-inch LCD Module with Resistive Touch Screen				USD89
MY-CAM002U	MY-CAM002U USB Camera Module				USD19
MY-WF003U	MY-WF003U USB WiFi Module				USD13

右滑表格查看更多内容