MYC-C7Z015
High-Performance, High-Quality Zynq-7015 Computing Platform
766MHz Xilinx XC7Z015 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
1GB DDR3, 4GB eMMC, 32MB QSPI Flash
On-board Gigabit Ethernet PHY
Two 0.8mm pitch 140-pin Board-to-Board Expansion Connectors
CE Certificated, Long-term Availability
Ready-to-Run Linux 5.4.0
MYD-C7Z015 Development Board
AMD Approved Adaptive Computing Partner
Excellent Integration and Cost-Optimized Scalable SoC Zynq™-7000
Based on Xilinx Zynq-7015, dual Cortex-A9+FPGA fully programmable processor; PS Uuit (ARM) and PL Unit (FPGA) use AXI high-speed on-chip bus communication, gigabit bandwidth, breaking through the communication bottleneck of traditional ARM+FPGA architecture, through the PL part (FPGA) flexible configuration of rich peripheral interfaces, such as serial port, Ethernet port, video interface, etc., can meet the expansion needs of industrial Ethernet and other applications.
SOM - MYC-C7Z015
The MYC-C7Z015 is an System-On-Module (SOM) based on Xilinx XC7Z015 (Z-7015) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series FPGA logic, four 6.25Gbps SerDes transceivers and one PCIe Gen2 x 4 integrated block. The MYC-C7Z015 module has 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog on board. It provides a large number of I/O signals for ARM peripherals and FPGA I/Os through two 0.8mm pitch 140-pin board-to-board connectors, which is ideal for your next embedded design.
Development Board - MYD-C7Z015
The MYD-C7Z015 development board integrates the Xilinx XC7Z015 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA, featuring a PCIe interface and SFP transceiver module interface on the base board for high-speed device expansion. The board utilizes the MYC-C7Z015 SOM, incorporating essential components such as the Zynq-7015 processor, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog, and takes full features of the Zynq-7015 SoC to create a rich set of peripherals to the base board through headers and connectors including one RS232 serial port, four USB Host ports, one Gigabit Ethernet port, CAN, HDMI, LCD/Touch screen, TF card slot, RTC, one XADC header to allow you take advantage of Xilinx XADC and one low-pin count FMC connector to allow various FMC cards for custom I/O options. Especially, it has one SFP transceiver module to keep higher transmission speed and better stability during your evaluation, as well as one PCIe interface, which contributes the data transmission speed to a high frequency when customers using the board.
Rich Development Resources
The MYC-C7Z015 SOM and development board offer abundant supporting resources, providing developers with a stable design reference and an optimal software development environment. This effectively enhances development efficiency, shortens the development cycle, optimizes design quality, accelerates product development, and reduces time to market.
Widely Used in Entry-level Embedded Systems
The MYC-C7Z015 SOM and development board offer abundant supporting resources, providing developers with a stable design reference and an optimal software development environment. This effectively enhances development efficiency, shortens the development cycle, optimizes design quality, accelerates product development, and reduces time to market.
Industrial Control
Military Installations
Machine Vision
Auto Industry
Medical Devices
Communication System
Hardware & Software
Item | Description |
---|---|
Processor | XC7Z015-2CLG485 |
Memory | DDR3: 1GB SDRAM (512MB*2) eMMC: 4GB QSPI Flash: 32MB (16MB is optional) |
PHY | 1x 10/100/1000M Ethernet PHY 1x USB PHY |
Watchdog | External watchdog |
LED | 1x blue LED for power indicator 1x red LED for FPGA program done indicator |
Working Temperature | -40~+85℃ (industrial grade) |
Ambient Humidity | 20%~90%,noncondensing |
Dimensions | 75mm x 55mm |
PCB | 12-layer PCB design |
Power Supply | SOM: 5V/0.5A |
Expansion Interface | Two 0.8mm pitch 140-pin board-to-board expansion connector |
Ethernet | 1x Gigabit Ethernet |
USB | 1x USB OTG 2.0 |
UART | Up to 2x Serial ports (reused from PS_MIO, can also be implemented through PL pins) |
I2C | Up to 2x I2C (reused from PS_MIO, can also be implemented through PL pins) |
CAN | Up to 2x CAN BUS (reused from PS_MIO, can also be implemented through PL pins) |
SPI | 1x SPI (reused from PS_MIO, can also be implemented through PL pins) |
ADC | ADC (one independent differential ADC, 16-channel ADC brought out through PL pins) |
SDIO | 1x SDIO (PS SDIO 0) |
Bank 13 | PL I/O configurable as up to 18 LVDS pairs and 1 single-ended I/O or 37 single-ended I/O |
Bank 34 | PL I/O configurable as up to 24 LVDS pairs and 2 single-ended I/O or 50 single-ended I/O |
Bank 35 | PL I/O configurable as up to 24 LVDS pairs and 2 single-ended I/O or 50 single-ended I/O |
Bank 112 | 4 GTP serial transceivers, 2 reference clock input |
ITEM | DESCRIPTION |
---|---|
PS Unit | |
USB | 4x USB 2.0 Host ports (through USB Hub) |
Serial port | 1x RS232 (DB9 port) |
TF card | 1x TF card slot (bootable) |
CAN | 1x CAN interface |
Ethernet | 1x 10/100/1000M Ethernet |
JTAG | 1x 2.54mm pitch 14-pin JTAG interface (PS, PL reused) |
RTC | Battery backed RTC |
Button | 1x for booting selection from TF card or QSPI |
Jumper | 1x RS485 serial port (isolated) |
PL Unit | |
XADC | 1x XADC interface |
FMC | 1x Xilinx standard LPFMC interface |
HDMI | 1x HDMI interface (16-bit YCrCb, support 1080p display, do not support audio) |
LCD | LCD/Touch screen interface (16-bit RGB, signals reused with HDMI, supports resistive and capacitive touch screen) |
LED | 2x LEDs (one for FMC module detection, one for power indicator) |
PMoD | Three-channel PMoD |
SFP | 1x SFP transceiver module with RJ45 interface (SFP-GE-T module, up to 1000Mbps) |
PCIE | 1x PCIe interface |
Item | Features | Description | Source Code |
---|---|---|---|
Cross compiler | gcc 9.2.0 | arm-xilinx-linux-gnueabi-gcc (GCC) 9.2.0 | |
Boot program | BOOT.BIN | First boot program including FSBL, bitstream | YES |
u-boot | Secondary boot program | YES | |
Linux Kernel | Linux 5.4.0 | Customized kernel for MYD-C7Z015 | YES |
Drivers | USB Host | USB Host driver | YES |
PCI-E | PCI-E driver | YES | |
SFP | SFP transceiver driver | YES | |
Ethernet | Gigabit Ethernet driver | YES | |
MMC/SD/TF | MMC/SD/TF card driver | YES | |
CAN | CAN driver | YES | |
LCD Controller | XYLON LCD driver | YES | |
HDMI | HDMI (SII902X chip) driver | YES | |
Button | Button driver | YES | |
UART | UART driver | YES | |
LED | LED driver | YES | |
GPIO | GPIO driver | YES | |
QSPI | QSPI Flash S25FL256S driver | YES | |
RTC | DS3231 RTC driver | YES | |
Resistive Touch | TSC2007 resistive touch screen driver | YES | |
Capacitive Touch | FT5X0X capacitive touch screen driver | YES | |
ADC | ADC driver | YES | |
File System | Ramdisk | Ramdisk system image | |
RootFS | Build from buildroot tools, With Qt 5.11.3 | ||
Ubuntu Desktop 18.04 | tar archive file and SD image |
Ordering
Related Topics
Similar Products