MYS-6ULX
Cost-effective Single Board Computers for Industry 4.0 and IoT Applications
528MHz NXP i.MX 6UltraLite / 6ULL ARM Cortex-A7 Processor
256MB DDR3, 256MB Nand Flash
Ethernet, WiFi, LCD, USB Host, Device, TF Card, IO…
Optional MYB-6ULX Expansion Board adds Ethernet, CAN, RS485, Audio, RTC and Camera
Optional 4.3 or 7 inch LCD Module, Camera and WiFi Modules
Two Variants Respectively for Industry 4.0 and IoT Applications
Support Linux 5.10.9 with Debian distribution or by Yocto Project with Ported QT
NXP Approved Gold Partner
High-performance, Ultra-efficient NXP i.MX 6UL/6ULL Processor Family
NXP i.MX 6UL/i.MX6ULL Processors, Arm-Cortex-A7 Core, Operating Speed up to 900 MHz, for Entry-level Embedded SOMs and SBCs with High Quality and Low Cost, Long-term Availability, Extensive Applications.
Single Board Computer - MYS-6ULX
Measuring only 70mm by 55mm, the MYS-6ULX is a high-performance low-cost Single Board Computer specially designed for Industry 4.0 (Industrie 4.0) and Internet of Things (IoT) applications. It is based on NXP’s i.MX 6UltraLite / 6ULL processor family which features the most efficient ARM Cortex-A7 core and can operate at 528 MHz. It has two 2.0mm pitch 2x20-pin headers on board to allow extension of the controller signals and ports to the base board through headers and connectors, thus exposing more features of the i.MX 6UL / 6ULL ARM Cortex-A7 Processors, so it can also be used as a System-on-Module (SoM) for your next embedded design.
The MYS-6ULX has two variants of boards which are called MYS-6ULX-IND and MYS-6ULX-IOT to meet different applications. The MYS-6ULX-IND is targeting industry 4.0 applications and based on i.MX6UL series processors while the MYS-6ULX-IOT is oriented for IoT applications and using i.MX6ULL series processors. They share the same hardware circuit design and fully compatible in software but also have their own characteristics. The MYS-6ULX-IOT has additionally a USB based WiFi module with antenna on the board. The MYS-6ULX-IND can support -40 to +85 Celsius extended temperature operation, which makes the board more suitable for industrial control and communication applications. MYIR has ported Linux 5.10.9 for the board with Debian distribution as well as Yocto project with ported QT. MYIR has also provided an interesting demo to enable customers to experience Amazon Alexa Voice Service.
MYIR has also designed an expansion board MYB-6ULX which is connected to the MYS-6ULX board through its onboard two 2.0mm pitch 2 x 20-pin expansion headers. The expansion board has extended one more Ethernet for MYS-6ULX and also added CAN, RS485, Audio, RTC and Camera functions which has further enhanced the performance of MYS-6ULX board. MYIR will offer optional LCD modules, Camera and WiFi modules to add functionality to the boards, which would be a complete embedded system.
A Complete Embedded System
The MYS-6ULX is based on NXP's i.MX6UL/6ULL series processors (ARM Cortex-A7, 528MHz), adopting a compact, stable, and reliable hardware design with a rich set of software and documentation resources. It provides a reliable and cost-effective embedded single-board computer solution for IoT applications, industrial control, and communication applications.
Application Scenarios for NXP i.MX 6UL/6ULL Series Processors
The NXP i.MX 6UL/6ULL series processors, renowned for their economic efficiency and high performance, are suitable for a broad range of applications in industries including industrial automation, telecommunications, IoT (Internet of Things), smart city infrastructure, intelligent security systems, and smart home technologies.
Charging Station
Energy and Power
Industrial Gateway
Industrial HMI
Construction Machinery
Medical Equipment
Hardware & Software
Item | Description |
---|---|
Processor | 528MHz NXP i.MX 6UltraLite / 6ULL ARM Cortex-A7 Processor (MCIMX6G2CVM05A / MCIMX6Y2DVM05A) |
Memory | 256MB (support up to 2GB) |
Storage | 256MB (support 512MB/1GB) 1x Micro SD card slot |
PCB | 8-layer PCB design |
Power Supply | 5V/1A |
Power Consumption | About 5V/0.25A (single board) About 5V/0.4A (board + 4.3” LCD) About 5V/0.8A (board + 7” LCD |
Dimensions | 70mm x 55mm |
Working Temperature | 0~+70℃ (commercial grade, MYS-6ULX-IOT) -40~+85℃ (industrial grade, MYS-6ULX-IND) |
Ethernet | 1x 10/100 Mbps Ethernet |
USB | 1x USB 2.0 Host 1x Micro USB 2.0 Device |
WiFi | 1x 2.4GHz WiFi Module, IEEE 802.11b/g/n standards (only for MYS-6ULX-IOT) |
LCD Interface | 1x 24-bit RGB LCD & Touch Screen (50-pin FPC connector) |
Buttons | 2x Buttons (User, Reset) |
LEDs | 3x LEDs (2x User LEDs, 1x Power indicator) |
Debug Interface | 1x 2.5mm pitch 3-pin Headers, TTL |
Expansion Interface | 2x 2.0mm pitch 2*20-pin male Headers (1 x Ethernet, 8 x UARTs, 4 x I2C, 2 x CAN, 4 x SPI, 8 x ADC, 4 x PWM, 2 x I2S, |
MYB-6ULX Expansion Board | 70mm x 55mm, 4-layer PCB, 5V/1A USB Power Supply |
Supports -40°C~85°C Working Temperature | |
1x 10/100Mbps Ethernet | |
1x CAN | |
1x RS485 | |
1x Micro USB Debug port | |
1x Microphone, 1 x Headphone, 1 x Line In | |
1x Camera Interface (30-pin FPC connector) | |
1x RTC Battery Socket | |
1x IO Expansion Header (2.0mm pitch 2*7-pin headers) | |
2x 2.0mm pitch 2*20-pin female Header Connectors (connect with MYS-6ULX) |
Item | Features | Description | Source Code |
---|---|---|---|
Bootstrap program | U-boot | The primary bootstrap (source code) | YES |
Linux Kernel | Version | Linux 5.10.9 | YES |
Drivers | USB Host | USB Host and Device drivers | YES |
Ethernet | Ethernet driver | YES | |
MMC/SD | MMC/SD card driver | YES | |
NandFlash | Nand Flash driver | YES | |
Ethernet | 10/100 Mbps Ethernet driver | YES | |
UART | UART driver | YES | |
LCD | LCD driver (supports MYIR’s 4.3- and 7- inch LCD module) | YES | |
Touch | Touch screen driver (supports 4-wire capacitive and resistive touch screen) | YES | |
CAN | CAN driver | YES | |
Camera | Camera driver | YES | |
Audio | Audio driver | YES | |
RTC | RTC driver | YES | |
Button | Button driver | YES | |
LED | LED driver | YES | |
File System | Yocto | Include Qt 5.0 | YES |
Debian | Binary file and Building Instructions | YES | |
Compiler Tool Chain | Linaro GCC 4.9 hf | Linaro GCC 4.9 hf | BINARY |
Ordering