Home

System-On-Modules (SOMs)

NXP Series

MYC-Y6ULX-V2

MYC-Y6ULX-V2

High-quality & Cost-effective SoM for Entry-level Embedded System

528MHz NXP i.MX 6UL/6ULL ARM Cortex-A7 Processors

256/512MB DDR3, 256MB Nand Flash / 4GB eMMC

On-board Ethernet PHY

1.0mm pitch 140-pin Castellated-Hole Expansion Interface

CE Certificated, Long-term Availability

Ready-to-Run Linux 5.4.3

MYD-Y6ULX-V2 Development Board

NXP Approved Gold Partner

Overview

Send an Inquiry

SOM Development Board Hardware & Software Download Ordering Related Topics Similar Products

High-performance, Ultra-efficient NXP i.MX 6UL/i.MX 6ULL Processor Family

NXP i.MX 6UL/i.MX6ULL Processors, Arm-Cortex-A7 Core, Operating Speed up to 900 MHz, for Entry-level Embedded SOMs with High Quality and Low Cost, Long-term Availability, Extensive Applications.

SOM - MYC-Y6ULX-V2

Measuring only 37mm by 39mm, the MYC-Y6ULX-V2 is an system-on-module (SoM) covered with shield and powered by NXP i.MX 6UltraLite / 6ULL processor based on the ARM Cortex-A7 architecture. With a choice of G2 and Y2 sub family processors running at 528MHz and integrated 256MB DDR3 and 256MB Nand Flash (4GB eMMC Flash is optional), the MYC-Y6ULX-V2 delivers high performance with ultra-efficient power that targets Industry Control, Communications, HMI, Smart Healthcare and Internet of Things (IoT) applications. It carries out as many as peripheral signals and IOs through 1.0mm pitch 140-pin stamp hole expansion interface to allow customer’s extension for their next embedded design. The module is ready to run Linux and can support industrial operating temperature range from -40 to +85 Celsius.

Development Board - MYD-Y6ULX-V2

MYIR also offers a development board MYD-Y6ULX-V2 which is built around the MYC-Y6ULX-V2 System-On-Module with a specially designed base board. A variety of peripheral interfaces have been brought out to the base board through headers and connectors including serial ports, two USB Host, one USB OTG, two 10/100Mbps Ethernet, CAN, Camera, LCD, Audio, TF card as well as a Mini PCIe interface for 4G LTE Module. The board also has an integrated WiFi Module with external antenna to allow wireless communications. Along with some cable accessories, the MYD-Y6ULX-V2 is a complete evaluation platform and reference design for development based on i.MX 6UL / i.MX 6ULL Cortex-A7 processor.

Rich Development Resources

The software materials of MYC-Y6ULX-V2 include, but are not limited to, source code for all peripheral drivers for Linux, Ubuntu, and Edge systems, along with associated development tools. The documentation materials comprise a product manual, hardware user manual, hardware design guide, PDF schematic diagram of the carrier board, Linux software development guide, and other pertinent materials.

Widely Used in Entry-level Embedded Systems

The MYC-Y6ULX-V2 System-On-Module, powered by the i.MX6UL/i.MX6ULL processor from MYIR, has received widespread acceptance among developers due to its exceptional cost-performance and low power consumption. This module is ideally suited for various applications such as industrial control, HMI, IOT gateway, smart home, handheld medical equipment, printer, and 2D scanning.

HMI

Industrial Control

Automotive Electronics

Medical Device

Smart Home

IoT Gateway

Hardware & Software

MYIR provides ODM and OEM services tailored to existing SOMs and carrier boards. For further inquiries, please reach out to MYIR.

System-On-Module (SOM) Development Board Carrier Board Software Features

Item	Description
Working Temperature	0~+70℃ (commercial grade)；-40～+85℃ (industrial grade)
Ambient Temperature	-50～+100 ℃
Ambient Humidity	20%~90%，noncondensing
Dimensions	37mm x 39mm
PCB	10-layer PCB design
Power Supply	SOM: 3.3V/0.25A
Power Consumption	SOM: less than 1W
Expansion Interface	1.0mm pitch 140-pin Stamp Hole Expansion Interface
- Ethernet	2x 10/100Mbps Ethernet
- GPIO	Up to 97x GPIOs
- UART	8x UART
I2C	4x I2C
CAN	2x CAN
SPI	4x SPI
ADC	10x ADC
PWM	8x PWM
I2S	3x I2S
Camera	1x Parallel Camera Sensor Interface
JTAG	1x JTAG interface
LCD	1x 24-bit LCD interface
Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet.

ITEM	DESCRIPTION
Power Supply	DC12V
Camera	1x Camera interface
RS232	1x 3-wire RS232 serial port (isolated)
Debug	1x TTL Debug interface
Ethernet	2x 10/100Mbps Ethernet interfaces
USB OTG	1x Micro USB 2.0 OTG port
USB Host	2x USB 2.0 Host ports (Type A)
CAN	2x CAN
TF Card	1x 4-bit TF card slot
RS485	1x RS485 serial port (isolated)
RTC Holder	Battery backed RTC (CR1225 battery is recommended)
Audio	1x 3.5mm Audio output jack；1x 3.5mm Audio input jack
LCD	16-bit true color display interface
Buttons	3x Buttons (1x Reset, 1x User, 1x ON/OFF)
LED	2x LEDs (1x Power indicator, 1x User LED)
4G Module	Mini-PCIe interface for USB based 4G LTE module, SMA external 4G antenna interface
SIM Card	1x SIM card slot
WiFi Module	1x SDIO based WiFi Module (0 to 70℃ working temperature), SMA external WiFi antenna interface
Expand IO	2.0mm 20-pin male expansion connector - 1 x SPI - 1 x I2C - 2 x UART - 10 x GPIO

Item	Features	Description	Source Code
Bootstrap program	U-boot	The primary bootstrap	YES
Linux Kernel	Linux	Linux 5.4.3	YES
Drivers	USB Host	USB Host driver	YES
	USB OTG	USB OTG driver	YES
	I2C	I2C driver	YES
	Ethernet	10/100Mbps Ethernet driver	YES
	MMC	MMC/eMMC/TF driver	YES
	LCD	LCD driver (support MYIR's 4.3-inch and 7-inch LCD Modules)	YES
	RTC	RTC driver	YES
	Touch	Capacitive touch screen (FT5316) and Resistive touch screen drivers	YES
	USART	UART driver	YES
	LED	GPIO LED driver	YES
	KEY	GPIO KEY driver	YES
	Audio	WM8904 driver	YES
	CAN bus	CAN driver	YES
	RS485	RS485 driver	YES
	Camera	OV2659 driver	YES
	WiFi	USI WM-N-BM-02 (BCM43362), driven by MMC	YES
	LTE	Supports Quectel's EC20, driven by USB	YES
File System	Yotcto rootfs	Built by Yocto 3.0, including Qt 5.13	YES
File System	Yotcto rootfs	Built by Yocto 3.0, a Universal File System for Terminal Devices	YES
Application Demos	GPIO KEY	GPIO KEY Demo	YES
	GPIO LED	GPIO LED Demo	YES
	NET	TCP/IP Sokect C/S Demo	YES
	RTC	RTC Demo	YES
	RS232	RS232 Demo	YES
	Audio	Audio Demo	YES
	LCD	LCD Display Demo	YES
Compiler Tool Chain	Cross Compiler	Linaro GCC 4.9 Hardfloat	BINARY
Compiler Tool Chain	MetaToolchain	Yocto GCC 5.3 Hardfloat	BINARY

右滑表格查看更多内容

Download

File Name	Type	Size
MYC-Y6ULX-V2 Overview	pdf	1.18 MB
MYD-Y6ULX-V2 Overview	pdf	1.25 MB
CE Certification for MYC-Y6ULX-V2 SOM	pdf	125.05 KB
3D STEP File for MYC-Y6ULX-V2 SOM.rar	rar	1.2 MB

Ordering

SOMs	CPU	RAM	Flash	Working Temp.	Price	Ordering
MYC-Y6ULY2-V2-256N256D-50-C	MCIMX6Y2DVM05A	256M DDR3	256M Nand Flash	0℃~70℃	USD19
MYC-Y6ULY2-V2-256N256D-50-I	MCIMX6Y2DVM05A	512M DDR3	4GB eMMC	0℃~70℃	USD22
MYC-Y6ULG2-V2-256N256D-50-I	MCIMX6G2CVM05A	256M DDR3	256M Nand Flash	-40℃~85℃	USD24
MYC-Y6ULY2-V2-4E512D-50-C	MCIMX6Y2CVM05A	256M DDR3	256M Nand Flash	-40℃~85℃	USD27
MYC-Y6ULY2-V2-4E512D-50-I	MCIMX6Y2CVM05A	512M DDR3	4GB eMMC	-40℃~85℃	USD29
Development Boards	Packing List		With WiFi	Working Temp.	Price	Ordering
MYD-Y6ULY2-V2-256N256D-50-C	* One MYD-Y6ULX-V2 board * One 1.5m cross Ethernet cable * One USB Cable * One 12V/1.25A Power adapter * One 4G LTE antenna * One WiFi antenna		Yes	0℃~70℃	USD89
MYD-Y6ULY2-V2-256N256D-50-I			Yes	0℃~70℃	USD93
MYD-Y6ULG2-V2-256N256D-50-I			Yes	-40℃~85℃	USD95
MYD-Y6ULY2-V2-4E512D-50-C	* One MYD-Y6ULX-V2 board * One 1.5m cross Ethernet cable * One USB Cable * One 12V/1.25A Power adapter		No	-40℃~85℃	USD105
MYD-Y6ULY2-V2-4E512D-50-I			No	-40℃~85℃	USD109
Add-on Options	Description				Price	Ordering
MY-CAM011B	MY-CAM011B Bus Camera Module				USD25
MY-TFT043RV2	MY-TFT043RV2 4.3-inch LCD Module with Resistive Touch Screen				USD59
MY-TFT070RV2	MY-TFT070CV2 7-inch LCD Module with Resistive Touch Screen				USD79
MY-TFT070CV2	MY-TFT070RV2 7-inch LCD Module with Capacitive Touch Screen				USD89

右滑表格查看更多内容