Home

System-On-Modules (SOMs)

SemiDrive Series

MYC-JD9360

MYC-JD9360

High-performance SemiDrive D9-Pro Processor with 3D GPU, AI NPU, HD VPU

SemiDrive D9-Pro Processor based on 1.6GHz Six ARM Cortex-A55 and Cortex-R5 Cores

Supports 100GFLOPS PowerVR 9XM GPU, VPU Codec H.265/H.264 /VP8/VP9 and 0.8Tops NPU

2GB LPDDR4, 16GB eMMC, 16MB Nor Flash, 256Kbit EEPROM

0.5mm pitch 314-pin MXM 3.0 Gold-finger-edge-card Connector

CE Certificated, Long-term Availability

Supports for Linux, Ubuntu

MYD-JD9360 Development Board

Overview

Send an Inquiry

SOM Development Board Hardware & Software Download Ordering Related Topics Similar Products

High-performance SemiDrive D9-Pro processor with 3D graphics processing, AI acceleration, HD VPU

The D9-Pro processor integrates six ARM Cortex-A55 high-performance cpus and ARM Cortex-R5 real-time cpus with hardware AMP and LINUX+RTOS support. Integrated high-performance, high-security HSM secure processor; Integrated PCIe3.0, USB3.0, Gigabit Ethernet, CAN-FD, UART, SPI and other rich peripheral interfaces, CAN be seamlessly applied to a variety of industrial applications at the lowest cost.

SOM - MYC-JD9360

Measuring 45mm by 82mm, the MYC-JD9360 SOM is a powerful embedded ARM SoM based on SemiDrive's 1.6GHz D9-Pro six-core ARM Cortex-A55 smart industrial processor with one real-time Cortex-R5 co-processor. The D9-Pro provides dedicated AI capabilities with integrated NPU, high-performance 3D graphics processing capabilities with Imagination's PowerVR 9XM GPU, high-resolution image processing capabilities with a pretty fast VPU, and an extensive set of peripherals such as PCIe3.0, USB3.0, Gigabit Ethernet, CAN-FD, UART, SPI, etc. through one 0.5mm pitch 314-pin MXM 3.0 gold-finger-edge-card connector.

Development Board - MYD-JD9360

The MYD-JD9360 Development Board is built around the MYC-JD9360 SOM and has explored many features of the D9-Pro SoC through one 0.5mm pitch 314-pin MXM 3.0 gold-finger-edge-card connector. It has rich communication interfaces including two RS232, two RS485, two USB3.0 HOST and one USB2.0 OTG, two TSN enabled Gigabit Ethernet, two CAN, one Micro SD card slot, one SDIO/UART based WiFi/BT module, one M.2 Socket for USB3.0 based 4G/5G LTE Module with one SIM card holder and one M.2 Socket for PCIE3.0 based SSD module. It also has advanced multi-media capabilities to support HDMI display, dual LVDS display, audio and camera.

Rich Development Resources

The development board based on SemiDrive D9-Pro provides a wealth of software resources and documentation, including but not limited to U-boot, Linux, all peripheral driver source code and related development tools. The documentation includes product manuals, hardware user manuals, hardware design guides, baseboard PDF schematic diagrams, and Linux software evaluation and development guides. MYIR aims to provide developers with stable reference design and perfect software development environment, which can effectively help developers improve development efficiency, shorten development cycle, optimize design quality, accelerate product development and time to market.

Widely Used in Entry-level Embedded Systems

The SemiDrive D9-Pro processor integrates six ARM Cortex-A55 high-performance cpus and ARM Cortex-R5 real-time cpus with hardware AMP and LINUX+RTOS support. It contains a 100GFLOPS PowerVR 9XM GPU and H.264/H.265 4Kp30 video codec, as well as 0.8Tops NPU. It is suitable for high-performance display and control all-in-one machine, industrial robot, construction machinery T-BOX, smart cockpit, car entertainment, intelligent medical equipment and other applications.

Intelligent Cabin

Power Intelligent Equipment

In-Vehicle Infotainment

Industrial Robot

Engineering Machinery T-BOX

Intelligent Medical Device

Hardware & Software

MYIR provides ODM and OEM services tailored to existing SOMs and carrier boards. For further inquiries, please reach out to MYIR.

System-On-Module (SOM) Development Board Carrier Board Software Features

Item	Description
Processor	D9360: 6*Cortex-A55@1.6GHz
Memory	LPDDR: 42GB (supports up to 4GB) eMMC: 16GB (supports up to 128GB) EEPROM: 256Kbit QSPI Nor Flash: 16MB
Working Temperature	-40～+85℃ (industrial grade)
Dimensions	82mm x 45mm
PCB	8-layer design
Power Supply	SOM: 5V/5A
Expansion Interface	0.5mm pitch 314-pin MXM 3.0 Gold-finger-edge-card Connector
Ethernet	2x Gigabit Ethernet
PCIe	2x PCIe3.0
USB3.0	2x USB3.0 (DRD)
SDIO	2x SDIO
UART	11x UART (supports up to 16 x UART)
CAN	2x CAN-FD (supports up to 4 x CAN-FD)
I2C	4x I2C (supports up to 12 x I2C)
SPI	2x SPI (supports up to 8 x SPI)
ADC	4x 12bit ADC
Display Output	1x MIPI-DSI; 2x LVDS
Camera	1x Parallel CSI; 1x MIPI CSI
Audio	4x Single-channel I2S/TDM 2x Multi-channel I2S
JTAG	1x JTAG
GPIO	Up to 135x GPIOs
Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet.

ITEM	DESCRIPTION
Power Supply	12V/2A (3-pin Phoenix terminal)
KEY	2x Keys (one for RESET and one for USER)
BOOT SET	1x Power Switch
SD	1x Micro SD card slot
LED	4x LED - System indicator - 1x 5G/4G module status LED - 1x User LED - 1x Power LED
DEBUG	1x Debug AP port (Cortex-A55) 1x Debug Secure port (Cortex-R5)
WIFI/BT	1x WiFi/Bluetooth Module
5G/4G	1x M.2 socket for USB based 4G/5G LTE Module 1x SIM card slot
Ethernet	2x Gigabit Ethernet interfaces
USB	2x USB3.0 Host ports (Type-A) 1x USB2.0 DRD port (Type-C)
UART	2x RS485 interface (with isolation) 2x RS232
CAN	2x CAN FD interfaces (with isolation)
DI/DO	2x Digital Input (DI) interfaces (with isolation) 2x Digital Output (DO) interfaces (with isolation)
DISPLAY	1x Dual-channel LVDS display interface 1x Single-channel LVDS display interfaces 1x HDMI interface
CAMERA	1x MIPI-CSI Camera Interface
AUDIO	1x Audio Input/Output Interface
Expansion IO	1x 2.54mm 2 x 20-pin male expansion header (ADC/OSPI/SPI interface)

Item	Features	Description	Source Code
Bootloader	U-boot	Boot Program uboot_2021.04	YES
Linux Kernel	Linux	Based on the official kernel_4.14.61 version customization	YES
Drivers	QSPI	W25Q128JVEIQ driver	YES
	Watchdog	SGM820B driver	YES
	USB Host	USB Host driver	YES
	USB OTG	USB OTG driver	YES
	I2C	I2C bus driver	YES
	SPI	SPI bus driver	YES
	Ethernet	YT8531SH driver	YES
	SDHI	eMMC/SD card storage driver	YES
	HDMI	LT8912 driver	YES
	LVDS	LT8912 driver	YES
	Dual LVDS	Dual LVDS driver	YES
	Audio	SGTL5000 audio driver	YES
	4G/5G	4G/5G driver	YES
	PWM	PWM control	YES
	ADC	ADC driver	YES
	RTC	RTC driver	YES
	GPIO	Universal GPIO driver	YES
	UART	RS232/RS485/TTL driver	YES
	CAN	CAN driver	YES
	Camera (MIPI)	OV5640 camera driver	YES
	WiFi	L297B-SR driver	YES
File System	myir-image-full	Full function image built with Yocto	YES
	myir-image-ubuntu	image with xfce desktop system built with Ubuntu 18.04	YES
	myir-image-Android	Android 10 (not available at present)	YES
Industry DEMO	Application of Charging pile	Refer to the State grid charging pile program to realize the meter Modbus protocol, IEC104 platform communication protocol and charging demonstration interface. Integrate into the MeasyHMI V2.0 version and demonstrate through full image.	YES
	PLC controller	Port the open source Ethercat master IGH, Linux real-time patch PREEMPT-RT or XENOMAI (real-time response speed and real-time jitter time measured data), and write a console application to control EtherCAT slave and servo motor by command.	YES
	Engineering Machinery Scenarios	Four AHD cameras capture four images and display them on the screen. The Analog instrument information is displayed on the screen, and the video picture and instrument information are displayed on split screens. Integrate into the MeasyHMI V2.0 version and demonstrate through full image.	YES

右滑表格查看更多内容

Download

File Name	Type	Size
MYC-JD9360 Overview	pdf	2.86 MB
MYD-JD9360 Overview	pdf	3.01 MB
CE Certification for MYC-JD9360 SOM	pdf	240.77 KB
3D STEP File for MYC-JD9360 SOM.rar	rar	3.25 MB

Ordering

SOMs	CPU	RAM	Flash	Working Temp.	Price	Ordering
MYC-JD9360-16E2D-160-I	D9360	2GB LPDDR4	16GB eMMC	-40~85℃	USD69
Development Boards	Packing List		With WiFi	Working Temp.	Price	Ordering
MYD-JD9360-16E2D-160-I	* One MYD-JD9360 Board (delivered with heatsink by default) * One USB to TTL cable * One 12V/2A Power adapter * One DC Power jack adapter * One Quick Start Guide		Yes	-40~85℃	USD159


Add-on Options	Description				Price	Ordering
MY-LVDS070C	MY-LVDS070C 7-inch LCD Module with capacitive touch screen				USD99
MY-CAM003M	MY-CAM003M MIPI Camera Module				USD25

右滑表格查看更多内容