Z-turn Board V2
ARM+FPGA Embedded Single Board Computer
667MHz AMD XC7Z010 (Zynq-7010) / 766MHz XC7Z020 (Zynq-7020) Dual-core ARM Cortex-A9 SoC with AMD 7-series FPGAs
1GB DDR3 SDRAM (2x 512MB, 32-bit), 16MB QSPI Flash, 64Kbit EEPROM
USB_UART, USB2.0 OTG, 1 x 10/100/1000Mbps Ethernet, CAN, HDMI, TF, …
Onboard Three-axis Acceleration Sensor and Temperature Sensor
Supports Optional Camera Module and Z-turn IO Cape
Supports for Linux OS
Supports Python Development
AMD Approved Adaptive Computing Partner
SoCs with Hardware and Software Programmability
AMD Zynq™ 7000 SoC family integrates the software programmability of an Arm®-based processor with the hardware programmability of an FPGA, enabling key analytics and hardware acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device. Consisting of single-core Zynq 7000S and dual-core Zynq 7000 devices, the Zynq 7000 family offers an exceptional price to performance-per-watt, fully scalable SoC platform for your unique application requirements. Dual-core ARM Cortex-A9 processors are integrated with 7 series programmable logic (up to 6.6M logic cells of logic and 12.5Gb/s transceivers) to enable highly differentiated designs for a wide range of embedded applications.
Single Board Computer - Z-turn Board V2
The Z-turn Board V2 is a high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010) or Zynq-7020 (XC7Z020) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.
The Z-turn Board V2 takes full features of the Xilinx Z-7010 / Z-7020 SoC, it has 1GB DDR3, 16MB QSPI Flash and 64Kbit EEPROM on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 96 / 106 user I/O and configurable as up to 39 LVDS pairs I/O.
The Z-turn Board V2 is capable of running Linux operating system. MYIR has provided Linux 4.14.0 SDK, the kernel and many drivers are in source code. MYIR also provides a MYIR-PYNQ project to support Python development on the Z-turn Board V2. The board is delivered with complete accessory kit including two USB cables, one Ethernet cable, one HDMI cable, one 16GB TF card and one 5V power adapter which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional WiFi and camera modules, Z-turn IO Cape for the Z-turn Board V2. The Z-turn IO Cape provides many peripheral signals and interfaces including ADC, GPIO, LCD, Camera and three Pmod interfaces.
The Z-turn Board V2 is an excellent development platform for evaluating and prototyping for Zynq-7000 SoC. It can also be used as a System-On-Module (SOM) for your next embedded design; typical applications are Industrial Automation, Test & measurement, Medical Equipment, Intelligent Video Surveillance, Aerospace and military, etc.
Rich Development Resources
The Z-turn Board V2 is a single-board computer based on the AMD/Xilinx Z-7000 series, offering abundant resources that provide developers with a stable design reference and a comprehensive software development environment. This helps developers improve development efficiency, shorten development cycles, optimize design quality, and accelerate product development as well as time-to-market. It supports direct access to PYTHON libraries and FPGA hardware libraries for function development, enabling the easy design of embedded systems through the ZYNQ SOC. With PYNQ, developers can program APSOCs without the need to design programmable logic circuits, and the code can be directly developed and tested on the ZYNQ 7000. Through PYNQ, programmable logic circuits can be imported as hardware libraries and programmed through their APIs, in a manner similar to importing and programming software libraries.
Expansive Uses of ARM+FPGA Embedded Single-board Platfroms
The Z-turn Board V2 is an embedded single-board solution that integrates a Xilinx Zynq-7010/7020 SoC with a Cortex-A9 dual-core processor and FPGA. It is ideal for various scenarios, including industrial control, medical applications, automotive systems, and surveillance. It meets the application requirements for low power consumption, cost-effectiveness, high bandwidth, exceptional reliability, and customized functionalities.
Visual Monitoring
Robot
Industrial Control
Automotive Industry
Smart Healthcare
Communication Systems
Download
| File Name | Type | Size | Download Links |
|---|---|---|---|
| Z-turn Board V2 Overview | 1.33 MB |
|
|
| Z-turn Board V2 Quick Start Guide | 543.71 KB |
|
|
| Z-turn Board V2 Track Length for IO | 35.41 KB |
|
|
| Z-turn IO CAPE Schematic | 176.26 KB |
|
|
| 3D STEP file of Z-turn Board V2.rar | rar | 4.28 MB |
|
| A Hello World tutorial for Z-turn board (written by Mr. Juan Abelaira of Akteevy) | 1021.59 KB |
|
|
| Z-turn Board Tutorial Book (written by Mr.Joseph Attard, Senior lecturer from Malta College) | 23.25 MB |
|
Ordering
| Single Board Computers | PACKING LIST | SoC | PRICE | ORDERING | ||
|---|---|---|---|---|---|---|
| MYS-7Z010-V2-0E1D-667-C-S | * One Z-turn Board V2 * One Quick Start Guide | XC7Z010-1CLG400 | USD99 |
| ||
| MYS-7Z020-V2-0E1D-766-C-S | XC7Z020-2CLG400 | USD119 |  | |||
| MYS-7Z010-V2-0E1D-667-C | * One Z-turn Board V2 * One Quick Start Guide * One cross Ethernet cable * One Mini USB2.0 cable * One Mini USB OTG Data cable * One HDMI cable * One 16GB TF card * One 5V/2A Power adapter | XC7Z010-1CLG400 | USD119 | | ||
| MYS-7Z020-V2-0E1D-766-C | XC7Z020-2CLG400 | USD139 | | |||
| ADD-ON OPTIONS | DESCRIPTION | PRICE | ORDERING | |||
| MY-CAPE001 | Z-turn IO Cape (IO expansion board for Z-turn Board V2) | USD29 |
| |||
| MY-CAM002U | MY-CAM002U USB Camera Module | USD19 | | |||
| MY-TFT070CV2 | MY-TFT070CV2 7-inch LCD Module with Capacitive Touch Screen (Support through Z-turn IO Cape) | USD89 | | |||
