Xilinx Zynq XC7Z010/20 Xilinx Zynq XC7Z010/20 Xilinx Zynq XC7Z010/20 Xilinx Zynq XC7Z010/20
  • Xilinx Zynq XC7Z010/20
  • Xilinx Zynq XC7Z010/20
  • Xilinx Zynq XC7Z010/20
  • Xilinx Zynq XC7Z010/20

MYC-Y7Z010/20-V2

High-Performance, High-Quality Zynq-7000 Computing Platform

667/766MHz AMD/Xilinx XC7Z010/20 ARM Cortex-A9 SoC with 7-series FPGA logic

512MB DDR3, 4GB eMMC, 16MB QSPI Flash

On-board Gigabit Ethernet PHY

1.27mm pitch 180-pin Castellated-Hole Expansion Interface

CE Certificated, Long-term Availability

Ready-to-Run Linux 4.14

MYD-Y7Z010/20-V2 Development Board

AMD Approved Adaptive Computing Partner

Excellent Integration and Cost-Optimized Scalable SoC Zynq™-7000

The MYC-Y7Z010/20-V2 SOM and development board is built on the Xilinx Zynq 7010/20 platform, featuring a dual-core Cortex-A9 processor. The PS (ARM) and PL (FPGA) components utilize AXI high-speed on-chip bus communication with gigabit-class bandwidth, effectively overcoming the communication bottleneck of traditional ARM+FPGA architectures. Additionally, it offers flexible configuration of rich peripheral interfaces through the PL part (FPGA), including serial ports, Ethernet ports, video interfaces, and more to meet the expansion requirements of industrial Ethernet applications.

SOM - MYC-Y7Z010/20-V2

The MYC-Y7Z010/20-V2 SOM is an industrial-grade System-on-Module (SoM) based on Xilinx Zynq-7000 family SoC available for either the XC7Z020 or XC7Z010 version. It has integrated the Zynq-7020 or Zynq-7010 device, 512MB DDR3 SDRAM, 4GB eMMC, 16MB quad SPI Flash, a Gigabit Ethernet PHY and external watchdog on board and provides 1.27mm 180-pin Castellated-Hole expansion interface to allow a large number of I/O signals for ARM peripherals and FPGA I/Os to be extended to your base board. The module is ready to run Linux and supports wide working temperature ranging from -40 to +85 Celsius which is ideal for industrial embedded applications.

Development Board - MYD-Y7Z010/20-V2

MYIR provides a development board MYD-Y7Z010/20-V2 for evaluating the MYC-Y7Z010/20-V2 SOM, which employs the MYC-Y7Z010/20-V2 as the controller board by populating the SOM on its base board through 1.27mm pitch 180-pin Castellated-Hole interface. The base board has extended a rich set of peripheral interfaces including serial ports, USB Host port, three Gigabit Ethernet ports, CAN, TF card slot, JTAG, etc. One 2.54mm pitch 2 x 25-pin expansion header is on the base board to let more GPIOs available for further extension.

Rich Development Resources

The MYC-Y7Z010/20-V2 SOM and development board offer abundant supporting resources, providing developers with a stable design reference and an optimal software development environment. This effectively enhances development efficiency, shortens the development cycle, optimizes design quality, accelerates product development, and reduces time to market.

Widely Used in Entry-level Embedded Systems

MYC-Y7Z010/20-V2 SOM and development board, based on XILINX XC7Z010/20 processor, with Cortex-A9 processing core and Artix-7 FPGA architecture, powerful performance, suitable for motion control, machine vision,ADAS, professional cameras, industrial Ethernet, test & measurement.

Industrial Control

Machine Vision

Robot

Auto Industry

Smart Healthcare

Communication System

Hardware & Software

MYIR provides ODM and OEM services tailored to existing SOMs and carrier boards. For further inquiries, please reach out to MYIR.
ItemDescription
Processor

XC7Z010-1CLG400I: 2*Cortex-A9@866MHz

(With 28K logic cells, 17,600 LUTs, 80 DSP slices)

XC7Z020-1CLG400I: 2*Cortex-A9@866MHz

(With 85K logic cells, 53,200 LUTs, 220 DSP slices)

Memory

DDR3: 512MB  (2 x 256MB, 32-bit)

eMMC: 4GB 

QSPI Flash: 16MB 

PHY

10/100/1000M Ethernet PHY (YT8521SH)

Watchdog

External watchdog

Working Temperature-40~+85℃ (industrial grade)
Ambient Humidity20%~90%,noncondensing
Dimensions75mm x 50mm
PCB10-layer design
Power SupplySOM: 5V
LED

3x LEDs

- 1x red LED for power indicator
- 1x green LED for FPGA program done indicator
- 1x flashing green LED for system indicator

Expansion Interface1.27mm pitch 180-pin Stamp Hole Expansion Interface
Ethernet1x Gigabit Ethernet
USB1x USB
Serial ports2x Serial ports
I2C2x I2C
CAN2x CAN BUS
SPI2x SPI
*Serial ports, I2C, CAN and SPI signals in PS part can be implemented through PL pins via Emio.
ADC2x ADC (16-channel ADC brought out through PL pins)
SDIO1x SDIO
I2S3x I2S
Camera1x Parallel Camera Sensor Interface
JTAG1x JTAG interface
LCD1x 24-bit LCD interface
右滑表格查看更多内容

Download

File Name Type Size Download Links
MYC-Y7Z010_20V2 Overview pdf 965.97 KB download
MYD-Y7Z010_20V2 Overview pdf 1.09 MB download
CE Certification for MYC-Y7Z010_20V2 SOM pdf 316.22 KB download
3D STEP File for MYC-Y7Z010_20V2 SOM.rar rar 3.6 MB download

Ordering

SOMsCPURAMFlashWorking Temp.PriceOrdering
MYC-Y7Z010-V2-4E512D-667-IXC7Z010-1CLG400I512MB DDR34GB eMMC-40~85℃USD79shopcar
MYC-Y7Z020-V2-4E512D-766-IXC7Z020-2CLG400I512MB DDR34GB eMMC-40~85℃USD89shopcar
Development BoardsPacking ListWith WiFiWorking Temp.PriceOrdering
MYD-Y7Z010-V2-4E512D-667-I (for XC7Z010-1CLG400I)

* One MYD-Y7Z010/20-V2 Board

* One 1.5m cross Ethernet cable

* One DB9 converting cable

* One Power converting cable

* One 12V/1.25A Power adapter
* One product disk

(including user manual,
base board schematic in PDF format,
datasheets and software package)

No-40~85℃USD109shopcar
MYD-Y7Z020-V2-4E512D-766-I

(for XC7Z020-2CLG400I)

No-40~85℃USD129shopcar
Add-on OptionsDescriptionPriceOrdering
MY-CAM002UMY-CAM002U USB Camera ModuleUSD19shopcar
右滑表格查看更多内容
0.113168s