logo
TI AM335x TI AM335x TI AM335x TI AM335x
  • TI AM335x
  • TI AM335x
  • TI AM335x
  • TI AM335x

MYC-Y335X-V2

65mm x 35mm Compact Design, On-board GigE PHY, PMIC

Up to 1GHz TI AM335x Series ARM Cortex-A8 Processors

256MB DDR3, 256MB Nand Flash

On-board Gigabit Ethernet PHY

Power Management IC (PMIC)

1.27mm pitch 146-pin Castellated-Hole Expansion Interface

CE Certificated, Long-term Availability

Ready-to-Run Linux 4.1.18 OS

MYD-Y335X-V2 Development Board

TI Third-party Partner


TI AM335x MPU featured with 3D GPU and PRU-ICSS separate from the ARM core

The AM335X series features the high performance, low power features of the ARM Cortex-A8 core, providing the highest DMIPS at the same cost. It also provides 3D graphics acceleration and integration of key peripherals to meet various application needs. Optional 3D graphics accelerators with performance up to 20 M/tri/s, support for LPDDR1/DDR2/DDR3 memory, and independent PRU subsystems provide additional flexibility in product design. Optional support for Ethercat and Profibus further meets the needs of industrial design.

SOM - MYC-Y335X-V2

Measuring only 65mm by 35mm, the MYC-Y335X-V2 System-On-Module (SOM) is a compact ready-to-run Linux ARM controller board based on TI AM335x (AM3352, AM3354, AM3358) series ARM Cortex-A8 Sitara processors which can run at up to 1GHz. It has 256MB DDR3 SDRAM, 256MB Nand Flash, 32Kb EEPROM, Gigabit Ethernet PHY chip on board and features excellent power management circuit design using TI’s TPS65217C solution. The module can be soldered to a specific-designed base board through its 1.27mm pitch 146-pin Castellated-Hole expansion interface to meet customers' peripherals, I/O and dimensional requirement.

Development Board - MYD-Y335X-V2

MYIR offers a development board MYD-Y335X-V2 for rapid evaluation of the MYC-Y335X-V2. It uses the MYC-Y335X-V2 as core controller board and has extended many peripheral interfaces like serial ports, USB Host port, OTG port, dual Gigabit Ethernet ports, WiFi, CAN, RS485, Micro SD and LCD through headers and connectors on the base board. Compared to MYIR’s MYD-C335X-V4 board, it is a reduced function device which is to meet customers’ simple requirement but additionally, the board features an on-board WiFi module to allow wireless network capabilities. This board is using the MYC-Y335X-V2 as the core controller board and connected to base board through 1.27mm pitch 146-pin stamp hole interface. The board can work in harsh environment supporting -40 to+85 Celsius extended temperature operation for industrial embedded applications.

Rich Development Resources

MYC-Y335X-V2 provides driver support for the Linux operating system, along with development kits and related materials. It provides stable design reference and perfect software development environment for developers, which can effectively help developers improve development efficiency, shorten development cycle, optimize design quality, accelerate product development and market time

Widely Used in Entry-level Embedded Systems

The MYC-Y335X-V2 is mainly used in consumer products including game peripherals, charging pile billing control units, high-energy toys, printers, consumer medical devices and educational terminals, as well as intelligent charging systems, intelligent vending machines, weighing systems and other consumer products.

Educational Terminal

Medical Devices

Gaming Peripherals

Intelligent Tolling System

EV Charging Pile TCU

Industrial

Hardware & Software

MYIR provides ODM and OEM services tailored to existing SOMs and carrier boards. For further inquiries, please reach out to MYIR.
ItemDescription
Processor

AM3352: Cortex-A8@800MHz

AM3358: Cortex-A8@1GHz

Memory

DDR3: 256MB SDRAM (128MB/512MB compatible)

Nand Flash: 256MB (128MB/512MB compatible)

EEPROM: 32Kb

Footprint1.27mm pitch 146-pin Castellated-Hole
Working Temperature-40~+85℃ (industrial grade)
Ambient Temperature-50~+100 ℃
Ambient Humidity20%~90%,noncondensing
Dimensions65mm x 35mm
PCB10-layer design
Power SupplySOM: +5V/0.8A
Power ConsumptionBase board: 5V/2A
Base board + SOM: 5V/0.26A
Base board + SOM + 4.3 inch touch screen: 5V/0.45A
Base board + SOM +7 inch touch screen: 5V/0.88A
EthernetOn-board Gigabit Ethernet PHY
Watchdog External Watchdog circuit
Power Management ICTPS65217C
Power indicator

One power indicator (Red LED)

User LED

One user LED (Green

Expansion Interface

1.27mm pitch 146-pin stamp hole interface:

- 2x USB OTG 2.0

- Up to 6x Serial ports
- 2x Gigabit Ethernet
- 2x I2C
- 1x SPI
- 8x ADC
- 2x PWM
- 2x SDIO

Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet.
右滑表格查看更多内容

Download

File Name Type Size Download Links
MYC-AM335X Overview pdf 1.31 MB download
MYD-Y335X-V2 Overview pdf 1.26 MB download
3D STEP File for MYC-Y335X-V2 SOM.rar rar 1.25 MB download

Ordering

SOMsCPURAMFlashWorking Temp.PriceOrdering
MYC-Y3352-V2-256N256D-80-IAM3352256MB DDR3256MB Nand Flash-40~85℃USD49shopcar
MYC-Y3358-V2-256N256D-100-IAM3358256MB DDR3256MB Nand Flash-40~85℃USD55shopcar
Development BoardsPacking ListWith WiFiWorking Temp.PriceOrdering
MYD-Y3352-V2-256N256D-80-I

* One MYD-Y3352-V2 board 

* One 1.5m cross Ethernet cable 

* One 1.5m mini USB2.0 Cable 

* One 5V/2A Power adapter 


No
-40~85℃USD105shopcar
MYD-Y3358-V2-256N256D-100-INo-40~85℃USD109shopcar
Add-on OptionsDescriptionPriceOrdering
MY-TFT043RV2MY-TFT043RV2 4.3-inch LCD Module with Resistive Touch ScreenUSD59shopcar
MY-TFT070RV2MY-TFT070CV2 7-inch LCD Module with Resistive Touch ScreenUSD79shopcar
MY-TFT070CV2MY-TFT070RV2 7-inch LCD Module with Capacitive Touch ScreenUSD89shopcar
右滑表格查看更多内容