MYC-C335X-V4
Supports up to 6x UART, 2x GigE, 1x CAN, 1x LCD
Up to 1GHz TI AM335x Series ARM Cortex-A8 Processors
256MB/512MB DDR3, 256MB/512MB Nand Flash
On-board Gigabit Ethernet PHY
Two 2.0mm pitch 60-pin Male Expansion Connectors
CE Certificated, Long-term Availability
Supports for Linux 4.1.18
MYD-C335X-V4 Development Board
TI Third-party Partner
TI AM335x MPU featured with 3D GPU and PRU-ICSS separate from the ARM core
The AM335X series features the high performance, low power features of the ARM Cortex-A8 core, providing the highest DMIPS at the same cost. It also provides 3D graphics acceleration and integration of key peripherals to meet various application needs. Optional 3D graphics accelerators with performance up to 20 M/tri/s, support for LPDDR1/DDR2/DDR3 memory, and independent PRU subsystems provide additional flexibility in product design. Optional support for Ethercat and Profibus further meets the needs of industrial design.
SOM - MYC-C335X-V4
The MYC-C335X-V4 has integrated the AM335x processor, 512MB DDR3 SDRAM, 512MB Nand Flash and Gigabit Ethernet PHY chip on board and can be served as the core of your embedded system. It has two 2.0mm pitch 60-pin male expansion connectors for interconnecting with your base board, thus providing an interface for the base board to carry most of the I/O signals to and from the SOM, such as two serial ports, four USB Host ports, one USB OTG port, dual Gigabit Ethernet ports, one CAN, one RS485, one Micro SD, HDMI, LCD, Touch screen have been carried out by headers and connectors on the base board.
Development Board - MYD-C335X-V4
The MYD-C335X-V4 Development Board is built around the TI Sitara AM335x family of ARM Cortex-A8 MPUs, capable of running at speeds up to 1GHz. The base board has been enhanced with a wide range of features and peripherals, leveraging the support of the MYC-C335X-V4 SOM and additional controller chips. These include two serial ports, four USB Host ports, one USB OTG port, dual Gigabit Ethernet ports, one CAN interface, one RS485 interface, a Micro SD slot, HDMI output, LCD display support, touch screen functionality and more.
Rich Development Resources
MYC-C335X-V4 provides driver support for the Linux operating system, along with development kits and related materials. It provides stable design reference and perfect software development environment for developers, which can effectively help developers improve development efficiency, shorten development cycle, optimize design quality, accelerate product development and market time
Widely Used in Entry-level Embedded Systems
The MYC-C335X-V4 is mainly used in consumer products including game peripherals, charging pile billing control units, high-energy toys, printers, consumer medical devices and educational terminals, as well as intelligent charging systems, intelligent vending machines, weighing systems and other consumer products.
Educational Terminal
Medical Devices
Gaming Peripherals
Intelligent Tolling System
EV Charging Pile TCU
Industrial
Hardware & Software
Item | Description |
---|---|
Processor | AM3352: Cortex-A8@800MHz AM3358: Cortex-A8@1GHz |
Memory | DDR3: 512MB (2*256MB) Nand Flash: 512MB |
Working Temperature | 0~+70℃ (commercial grade);-40~+85℃ (industrial grade) |
Ambient Temperature | --50~+100 ℃ |
Ambient Humidity | 20%~90%,noncondensing |
Dimensions | 70mm x 50mm |
PCB | 8-layer design |
Power Supply | SOM: +3.3V/0.8A |
Power Consumption | Base board: 5V/2A |
Base board + SOM: 5V/0.3A | |
Base board + SOM + 4.3 inch resistive touch screen: 5V/0.45A | |
Base board + SOM +7 inch touch screen: 5V/0.88A | |
Ethernet | On-board Gigabit Ethernet PHY |
Power indicator | One power indicator (Red LED) |
User LED | One user LED (Green) |
Expansion Interface | Two 2.0mm pitch 60-pin expansion connectors: - 2x USB2.0 OTG ports - 6x Serial ports |
One 2.0mm pitch 26-pin expansion interface | |
One 2.54mm pitch 10-pin expansion interface | |
Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet. |
ITEM | DESCRIPTION |
---|---|
Power Supply | +5V/2A (Base board) |
Audio | 1x Audio input port (3.5mm jack) 1x Stereo Audio output port (3.5mm jack) |
Display | 1x LCD interface (16-bit true color, supports optional 4.3-inch and 7-inch TFT LCD with 4.3-inch resistive or 7-inch resistive or 7-inch capacitive touch screen) |
USB | 4x USB2.0 Host ports |
Serial port | 1x 3-wire RS232 Debug serial port (DB9) |
RS485 | 1x RS485 (with isolation) |
TF | 1x TF card slot |
CAN | 1x CAN interface (with isolation) |
HDMI | 1x HDMI interface |
Ethernet | 2x 10/100/1000Mbps Ethernet interfaces |
Buttons | 4x Buttons (1x Reset button, 3x User buttons) |
Power indicator | 1x Power indicator (Red LED) |
Expand IO | 2x 2.0mm 20-pin expansion connectors - 7x ADC |
Item | Features | Description | Source Code |
---|---|---|---|
Bootstrap program | SPL | The primary bootstrap | YES |
u-boot | The secondary bootstrap | YES | |
Linux Kernel | Version | Linux 4.1.18 | YES |
Drivers | USB OTG, USB WiFi, Gigabit Ethernet, MMC/SD/TF, NandFlash, CAN, RS485, Audio, LCD Controller (supports 4.3- and 7-inch LCD), RTC, HDMI, Touch driver, Button, UART, LED | YES | |
File system | Buildroot With QT library (V5.6.2) | Provide image file and buildroot in source code | YES |
Examples | Audio, CAN, EEPROM, framebuffer, gpio, keypad, led, mtd, network, rtc, RS232, RS485 | YES |
Ordering
Related Topics
Similar Products