Zynq UltraScale+ MPSoC based FZ3 Card for Deep Learning
2020-07-01
2802
Shenzhen, China – July 1, 2020 – MYIR introduces a powerful FZ3 Card for deep learning. Built around the Xilinx Zynq UltraScale+ ZU3EG MPSoC, with Computing Power up to 1.2TOPS and MobileNet up to 100FPS, the FZ3 Card is an ideal machine learning hardware for developers to develop, validate or just directly integrate it into their end artificial intelligence (AI) products, thus accelerating their AI applications.
The FZ3 Card (with installed radiator) has the size of 100mm by 70mm, integrated with 4GB DDR4, 8GB eMMC, 32MB QSPI Flash and 32KB EEPROM, many peripherals are routed out on board including USB 2.0, USB 3.0, Gigabit Ethernet, TF, DisplayPort (DP), PCIe interface, MIPI-CSI, BT1120 camera, USB-UART, JTAG, IO expansion interfaces.
FZ3 Card Top-view
FZ3 Card Bottom-view
The FZ3 Card is also provided with rich software resources, it’s able to run PetaLinux 2019.1, and fully compatible to use Baidu Brain’s AI development tools like EasyDL, AI Studio and EasyEdge, which makes it much easier for developers to quickly leverage Baidu-proven technology or deploy self-defined models, enabling faster deployment. Typical applications of the FZ3 Card are AI camera, AI computing device, robotics, intelligent car, intelligent electronic scale, patrol UAV and other embedded intelligent applications.
Software Architecture of FZ3 Card
MYIR provides FZ3 Kit as a whole development kit, it contains the FZ3 Card and some necessary accessories including one 12V/2A power adaptor, one 16GB TF card, one mini USB cable and one mini DP to HDMI cable.
More information about the new products can be found at:
https://en.myir.cn/FZ3/106.html
2026-04-27
MYC-YF13X SDK Update：Triple Upgrade in System, Security & Functionality
MYIR introduces the STM32MP135F to the MYC-YF13X System-On-Module, which comes with security features compliant with the EU's Cyber Resilience Act (CRA).
2026-04-21
MYIR Launches Renesas RZ/T2H-based SoM for High-Performance Industrial Real-Time Control
MYIR announced the launch of the MYC-YT2HX SoM, and its companion development board, the MYD-YT2HX, Built around the powerful Renesas RZ/T2H processor (R9A09G077M44GBG).
2026-04-09
MYIR Launches Allwinner T153-Based MYC-YT153MX SOM for Industrial Intelligence
MYIR Launches Allwinner T153-Based MYC-YT153MX System-on-Module for Industrial Intelligence
2026-03-19
SDK Updates: MYC-YR3506/MYC-LT527X/MYC-YM62X/MYC-LMX9X
SDK Updates: MYC-YR3506/MYC-LT527X/MYC-YM62X/MYC-LMX9X
2026-03-04
MYIR Launches Low-Power TI AM62Lx-based SoM for Industrial & IoT, Featuring 3x CAN-FD and 8x UART
MYIR has launched the MYC-YM62LX System-on-Module (SoM) based on the Texas Instruments AM62Lx processor (AM62L32BOGHAANBR), alongside its development board, the MYD-YM62LX.
2026-01-04
MYIR Launches Upgraded ARM+FPGA System-On-Module Based on AMD Zynq UltraScale+ MPSoC
MYIR launches its new high-performance MYC-CZU3EG-V3 System-On-Module (SOM), powered by the AMD Zynq UltraScale+ ZU3EG MPSoC.
2025-12-25
MYC-LF25X: Built-in Full-Stack Security for Seamless CRA & IEC 62443 Compliance
Achieve CRA and IEC 62443 compliance with MYIR's MYC-LF25X SOM. This one-stop solution features embedded full-stack security, SESIP Level 3 certified hardware, and a mature ecosystem for safe product development.
2025-11-07
SDK Updates: MYC-YF13X/MYC-LD25X
SDK Update Notice for STM32MP135 and STM32MP257 SOMs
2025-10-20
SDK Updates: MYC-LR3568/MYC-LR3576/MYC-Y7Z010/20-V2
SDK Updates for Xilinx Zyqn-7010/20 and Rockchip RK3568/3576 SOMs
2025-08-14
SDK Updates: MYC-C7Z010/20-V2 and MYC-YT113i
SDK Update Notice for AMD/Xilinx Zynq-7010/20 and Allwinner T113-i SOMs